Owning a 3D printer is a bit like owning a race car - you are the mechanic as well as the driver, so you'll need to do some maintenance, and occasionally fix things when they go wrong. You'll need to own a PC, have an internet connection, know how to use screwdrivers and spanners, and have the confidence to pull things apart for maintenance and repair.
Anycubic have an excellent collection of support resources to assist you in replacing parts yourself.
Note that some components such as FEP films are consumables that wear as you use them (just like tyres on cars), and are expected to be replaced by the owner when worn out. Refer to the Anycubic warranty page for component warranty periods.
Support Wiki for Photon Mono 4
There is a support wiki available here: https://wiki.anycubic.com/en/resin-3d-printer/photon-mono-4
User manuals for Photon Mono 4
Common replacement tutorials for Photon Mono 4
- Photon Mono 4 FAQ
- Photon Mono 4 USB not recognized
- Photon Mono 4 Abnormal pop-up troubleshooting
- Photon Mono 4 Z-axis limit switch not working properly guide
- Photon Mono 4 Maintenance suggestion
- Photon Mono 4 Printing effect is not-good
- Photon Mono 4 Z-axis screw cleaning guide
- Photon Mono 4 FEP film Replacement Guide
- Photon Mono 4 Motherboard Replacement Guide
- Photon Mono 4 UV Lamp Module Replacement Guide
- Photon Mono 4 UV Lamp Board Cooling Fan Replacement Guide
- Photon Mono 4 LCD Screen Replacement Guide
- Photon Mono 4 Control Panel Replacement Guide
- Photon Mono 4 Z-axis Motor Replacement Guide
- Photon Mono 4 Limit Switch Replacement Guide
How to find spare parts for Photon Mono 4
https://store.anycubic.com/collections/accessories-for-photon-mono-4
Technical Support from the manufacturer
Visit this page: https://anycubic.com/en/SupportCenter
You can also submit a support ticket here: https://anycubicsupport.zendesk.com/hc/en-001/requests/new
Comments
0 comments
Article is closed for comments.